Mô tả
- Micro plasma welding, GTA, MMA
- User friendly touch screen control panel
- Compact design with integrated cooling unit
- Wide range of additional accessories
Micro GAP 50DC is a stand-alone arc welding power unit. The unit is dedicated for microplasma welding and hard-facing with rods. Micro GAP 50 DC has very complex design and despite integrated cooling relatively small dimensions. Advanced inverters allows to weld even from 0,5 A and the current can be adjusted with accuracy up to 0,1 A. The user-friendly 5,7“ touchscreen control panel with newly developed user interface allows the operator a simplified and even faster preselection of welding parameters also with protective gloves.
All the settings are displayed on the touchscreen and up to 1,000 memory locations are available for saving the welding parameters. Additionally, Micro GAP 50 DC is capable to weld in TIG and MMA mode (preferable 1,6 mm and 2,0 mm electrodes from ToolTec series).
Supply voltage | 3x400V ±10% 50/60Hz, 230V ±10% 50/60Hz, 3x460V ±10% 50/60Hz |
Supply fuse | 16A |
Max. power consumption | 3.5 kVA |
RMS value of the largest main current | 9.6A |
Cos phi | 0.99 |
Max. welding current (35% ED) | 50A |
Max. welding current (60% ED) | 40A |
Max. welding current (100% ED) | 33A |
Max. pilot current (35% ED) | 30A |
Amperage range for plasma welding | 0.5 – 50A |
Open circuit voltage pilot inverter | 100V DC |
Open circuit voltage main inverter | 100V DC |
Protection class | IP 23 |
Dimensions (L x B x H) | 655 x 310 x 605 mm |
Weight | 46.5 kg |