Mô tả
OK Autrod NiCrMo-13
A continuous solid Ni-Cr-Mo electrode for welding of high alloyed Ni-base materials, 9%Ni steel and super austenitic steels of type 20Cr-25Ni with 4-6% Mo. Can also be used for welding carbon steel to Ni base steel. The weld metal has a very good toughness and is corrosion resistant over a wide range of applications in oxidising and reducing media.
| Classifications Wire Electrode: | SFA/AWS A5.14:ERNiCrMo-13, EN ISO 18274:S Ni 6059 (NiCr23Mo16) |
| Approvals: | VdTÜV 12662 (MV) |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type: | Alloyed nickel (Ni + 23 % Cr + 16 % Mo) |
| Typical Tensile Properties | |||
| Condition | Yield Strength | Tensile Strength | Elongation |
| As welded | 500 MPa | 750 MPa | 40 % |
| As welded | 500 MPa | 700 MPa | 42 % |
| Typical Charpy V-Notch Properties | ||
| Condition | Testing Temperature | Impact Value |
| As welded | -110 °C | 120 J |
| Typical Wire Composition % | |||||||
| C | Mn | Si | Ni | Cr | Mo | Al | Fe |
| 0.01 | 0.2 | 0.1 | 61.0 | 23.0 | 16.0 | 0.3 | 1.0 |
| Deposition Data | ||||
| Diameter | Current | Voltage | Wire Feed Speed | Deposition Rate |
| 1.0 mm | 100-200 A | 21-27 V | 6-13 m/min | 2,5-5,5 kg/h |
| 1.2 mm | 160-280 A | 24-30 V | 6-10 m/min | 3,6-6 kg/h |
| 1.6 mm | 200-350 A | 25-32 V | 4-8 m/min | 4,3-8,6 kg/h |
