Mô tả
OK Tigrod NiCrMo-13
Bare Ni-Cr-Mo rods for welding of high alloyed Ni-base materials, 9% Ni steel and super austenic steels of type 20Cr-25Ni with 4-6% Mo. Can also be used for welding carbon steel to Ni base steel. The weld metal has a very good toughness and is corrosion resistant over a wide range of applications in oxidizing and reducing media.
Classifications Wire Electrode: | SFA/AWS A5.14:ERNiCrMo-13, EN ISO 18274:S Ni 6059 (NiCr23Mo16) |
Approvals: | VdTÜV 12663 (MV) |
Approvals are based on factory location. Please contact ESAB for more information.
Alloy Type: | Alloyed nickel (Ni + 23 % Cr + 16 % Mo) |
Typical Tensile Properties | |||
Condition | Yield Strength | Tensile Strength | Elongation |
As welded | 500 MPa | 750 MPa | 40 % |
Typical Charpy V-Notch Properties | ||
Condition | Testing Temperature | Impact Value |
As welded | -110 °C | 120 J |
Typical Wire Composition % | |||||||
C | Mn | Si | Ni | Cr | Mo | Al | Fe |
0.01 | 0.2 | 0.1 | 61.0 | 23.0 | 16.0 | 0.3 | 1.0 |