Mô tả
OK Autrod 12.64
OK Autrod 12.64 is a copper-coated, Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive components, pressure vessel fabrication and shipbuilding. It has a slightly
higher manganese and silicon content than OK Autrod 12.50 to increase the weld metal strength. This also promotes low sensitivity to surface impurities and contributes to smooth, sound welds. The wire can be used with both Ar/CO2 mixed gas and pure CO2 shielding gas
Classifications Weld Metal: | EN ISO 14341-A:G 42 3 C1 4Si1, EN ISO 14341-A:G 46 4 M21 4Si1, EN ISO 636-A:W 46 3 W4Si1 |
Classifications Wire Electrode: | SFA/AWS A5.18:ER70S-6, EN ISO 14341-A:G 4Si1, EN ISO 636-A:W4Si1 |
Approvals: | CE EN 13479, DNV III YMS (M21), ABS 3YSA (M21), ABS 3YSA (C1),
BV SA3YM (C1&M21), DNV III YMS (C1), LR 3YS H15 (C1), LR 3YS H15 (M21), RS 3YMS (C1), RS 3YMS (M21), GL 3YS (C1&M21), DB 42.039.11, NAKS/HAKC 1.2MM-1.6MM, VdTÜV 04294 |
Approvals are based on factory location. Please contact ESAB for more information.
Alloy Type: | Carbon-manganese steel (Mn/Si-alloyed) |
Typical Tensile Properties | |||
Condition | Yield Strength | Tensile Strength | Elongation |
EN 80Ar/20CO2 (M21) | |||
As welded | 535 MPa | 595 MPa | 26 % |
EN 80Ar/20CO2 (M21) | |||
Stress relieved 15 hr 620 °C | 395 MPa | 520 MPa | 28 % |
EN CO2 (C1) | |||
As welded | 427 MPa | 537 MPa | 25 % |
Typical Charpy V-Notch Properties | ||
Condition | Testing Temperature | Impact Value |
EN 80Ar/20CO2 (M21) | ||
As welded | 20 °C | 130 J |
As welded | -20 °C | 90 J |
As welded | -30 °C | 75 J |
As welded | -40 °C | 70 J |
EN 80Ar/20CO2 (M21) | ||
Stress relieved 15 hr 620 °C | 20 °C | 120 J |
Stress relieved 15 hr 620 °C | -20 °C | 90 J |
EN CO2 (C1) | ||
As welded | 20 °C | 110 J |
As welded | -29 °C | 76 J |